SINGLE BLOCK

The MBSP skin pass block is a separate single block with its own capstan, dancer arm and rotating die holder or cassette.
It has the same characteristics and features of a capstan block of a draw bench. It can be manufactured with capstan on a vertical or horizontal shaft.

The MBS bull block stripper  type is a single or final block that collects the wire directly on a coil on top of the capstan.
The wire can be drawn, straightened or cleaned during the process.

The MBDD is a double deck capstan single or final block used to straighten or clean the wire befor the spooling process.

Skin pass
MBSP

TYPE OF WIRE

Ferrous and non-ferrous

MAX. INLET DIAMETER

Up to 2,5 mm (0,098") for ferrous alloys

and 3 mm (0,12") for aluminum alloys

APPLICABLE DEVICE

Dry or Wet drawing

CAPSTAN

300/500mm tungsten carbide or
ceramic coated

MAX. REDUCTION

From 10% to 30% depending on avaiable torque and material reduction and material tensile

Stripper
 MBS

TYPE OF WIRE

Low, medium, high carbon & stainles steel

MAX. INLET DIAMETER

Up to 15mm (0,59″)

APPLICABLE DEVICE

Drawing and Straightening or cleaning device

CAPSTAN

300/400/500/600/700/800/900/1200mm

tungsten carbide or ceramic coated

MAX. REDUCTION

From 10% to 30% depending on avaiable torque and material reduction and material tensile

Double Deck
 MBDD

TYPE OF WIRE

Low, medium, high carbon & stainles steel

MAX. INLET DIAMETER

Up to 15mm (0,59″)

APPLICABLE DEVICE

Drawing and Straightening or cleaning device

CAPSTAN

300/400/500/600/700/800/900/1200mm

tungsten carbide or ceramic coated

MAX. REDUCTION

From 10% to 30% depending on avaiable torque and material reduction and material tensile

Copyright © 2020 - Gimax Srl - Via della Tecnica, 1 - 36050 Sovizzo (VI) ITALY - VAT 00631860244

MBSP

SkinPass block